ARX USB-3U, USB DI I/O Ultra Interface, Multi Sample Rate to 192Khz. Transformer Isolated XLR In & Out

ARX USB-3U, USB DI I/O Ultra Interface, Multi Sample Rate to 192Khz. Transformer Isolated XLR In & Out

ARX USB Ultra I/O - a true 24 bit High Resolution Plug and Play USB 2 channel play and record digital/analog pro audio interface. It removes the need to use any existing sound card outputs, with their inherent noisy environment and problematic grounding.

The ARX USB Ultra I/O - a true 24 bit High Resolution Plug and Play USB 2 digital/analog pro audio interface with five selectable sample rates: 44.1 KHz, 48 KHz, 88.2KHz, 96KHz or 192 KHz. Full transformer balanced Inputs and Outputs provide the isolation required to eliminate earth loops / ground hum and other extraneous noise and distortion

• Plug and Play, The USB ULTRA I/O installs as a fully compatible generic USB audio device, requiring no special driver program installation on Windows 10 or Mac OSX
• On the Front panel there is a standard Type B USB connector, as well as a ground lift switch and Status LEDs indicating the sample rate selected or available.
• The Rear panel has Left and Right transformer balanced analog Amphenol XLR Input and output connectors that connect to any standard balanced analog inputs and outputs.
• The USB ULTRA I/O is housed in a heavy duty all-steel chassis finished in attractive matt textured powder coat, with hardwearing epoxy screen printing and slip resistant rubber base pad. It is ideal for interfacing USB equipped computers (especially notebook/laptop computers) with the balanced inputs and outputs of professional sound systems.

• Connector : USB type B port
• Codec : Hi Resolution 24 bit 192 KHz
• Sample Rate : Software selectable : 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz and 192 KHz
• Input Impedance : 10 KOhms Transformer Balanced
• Output Impedance : 300 Ohms Transformer Balanced
• Maximum Input Level : Nominal 0 dB
• Maximum Output Level : Nominal 0 dB
• Input/Output Noise :
  • USB - System dependent
  • ISO transformer - Enviroment sensitive
• Frequency Response : 20 - 20 KHz ± 0.5 dB
• Power Consumption : via USB Port - typically 0.8W
• Optimal storage temperature range 0'C - 40'C
• Operating temperature range 0'C - 50'C
• Input Connectors:
  • Channel 1 / Left and Channel 2 / Right 2 x Female Amphenol XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 screen/shield via ground Lift switch
• Output Connectors:
  • Channel 1 / Left and Channel 2 / Right 2 x Male Amphenol XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 screen/shield via ground Lift switch
• Construction :All-steel polyurethane coated chassis, fiberglass PCB, epoxy printing ,USB Ultra I/O chassis grounded via USB connection slip-resistant rubber base. Package includes a premium quality USB-A to USB-B cable