Overview
Ashly SRA-4075, SRA Convection-Cooled Amplifier
The newly designed Ashly SRA-Series of amplifiers incorporates switch-mode-power supplies and Class-D amplifier circuitry, providing an extremely power-efficient solution. Four models in each series are available in two and four channel configurations with power ratings of 75W and 150W per channel. Features include: convection cooling, extremely low noise, an internally switchable 120V/240V power supply, extensive protection circuitry, euroblock inputs and screw terminal outputs.
SRA-Series amplifiers are housed in a compact 1RU chassis weighing only 10 lbs. and are designed to drive four or eight ohm loads. Front panel features include: level attenuators for each channel, signal present and clip alert status LEDs for each channel. Rear panel features include: rear panel switches to select between two choices of input sensitivity, HPF frequencies and normal or bridged mode, remote power turn-on/off and adjustable turn-on delay up to eight seconds. Two-channel versions have a stereo headphone jack located on the front panel.
Specifications / Documents
- Frequency Response (8 Ohms): 20Hz–20kHz, ±1.0dB
- Distortion (SMPTE, typical): < 0.5% - 8 Ohm load, 10dB below rated power
- Distortion (THD-N, typical): < 0.5% - 8 Ohm load, 10dB below rated power, 20Hz–20kHz
- Damping Factor (8 Ohm load, < 1 kHz): > 200 into 8 Ohms
- Input Impedance: 20k Ohms, Balanced
- Input Sensitivity: 1dBu (75W), 4dBu (150W)
- Gain: 26dBu, 36dBu, Selectable
- Maximum Input Level: +21dBu
- HPF: 80Hz 2nd Order, defeatable
- Cooling: Convection
- Output Circuitry: Class D
- Amplifier/Load Protection: Output Overcurent, DC Output, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting, Mains Fuse
- Channels: 4
- Max Output Power: Per Channel, 20Hz–20KHz, 1% THD All Channels Driven
- 4 Ohms: 75W
- 8 Ohms: 40W
- 8 Ohms (bridged): 150W