Clear-Com CC-110 Single-Ear Lightweight Intercom Headsets

Clear-Com CC-110 Single-ear Lightweight Intercom Headsets

The CC-110 (single-ear) premium lightweight headsets feature high performance headphones and cardioid dynamic microphones that provide high quality audio.The CC-110 headset can be easily adjusted to accommodate the preference of any user. The microphone boom has a 300° rotation to allow the microphone to be worn on the left or right side of the head. Users can make the headset larger or smaller by using the slide adjusts on either side of the headband. Cushioned with super-soft leatherette or foam padding, the headphones sit on the ear to provide a comfortable fit for users. A rotating,
flexible gooseneck is included for optimal positioning. 

The CC-110 headset microphone can be turned on and off by moving the microphone boom. To turn ON the microphone, pull the boom gently downwards (past the 10 o’clock/2 o’clock position). To turn the microphone OFF, push the boom gently upwards (above the 10 o’clock/2 o’clock position).

The CC-110 headset have been designed so that the cabling and connector type can be adapted quickly to the application. Users can order cables with different XLR connector choices and appropriate pin-outs. To change the connector cable in the field, simply disconnect the cable from the headset and exchange the cable with a standard Phillips screwdriver. The same process can be used to repair and replace a damaged cable
on the fly.

Order Codes

• CC-110-X4: Single-ear 4-pin Female XLR
• CC-110-X5: Single-ear 5-pin Male XLR
• CC-110-X6: Single-ear 6-pin Male XLR (balanced mic)
• CC-110-X7: Single-ear 7-pin Female XLR
• CC-110-B6: Single-ear no connector

• High-quality dynamic cardioid microphone
• 20Hz - 20kHz frequency response
• Choice of earpads: leatherette or soft foam (both included)
• Flexible gooseneck microphone positioning
• Boom rotataion ON/OFF switch for quick microphone muting
• Interchangeable cabling for easy connector changing and repair
• Fully serviceable headset
• Storage bag included

Headphone

• Type: Closed-back
• Driver: 36mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
• Frequency Response: 20Hz v- 20kHz
• Impedance: CC-110: 400Ω ±30%; at 1kHz typical

Microphone

• Element: Dynamic
• Driver: 15mm, neodymium magnet
• Polar Pattern: Cardioid
• Frequency Response: 250Hz - 20kHz
• Impedance: CC-110: 200Ω ±30%; at 1kHz typical

Power

• Maximum: 500mW

Other

• Microphone Open Circuit Sensitivity: -64dB ±3.5dB; (0dB=1V/1Pa, at 1kHz , typical)
• Headphone Sensitivity: CC-110: 99dB ±3dB (SPL) / 1mW, at 1kHz typical
• Connector: Cable: 5ft (1.55m) long with 8-pin connector at headset end; 4-pin Female XLR (other cables available)
• Dimensions: Packaging for CC-110:6.7 x 8 x 3.5in (WxHxD)
• Weight: CC-110: 5.1oz (145g) without 8-pin cable assembly and M3*18mm SCREW