Clear-Com RS-701, Single-Channel Beltpack with 4 Pin XLR Male

Clear-Com RS-701, Single-Channel Beltpack with 4 Pin XLR Male

The RS-701 is a single-channel analog beltpack that can carry power and audio through the XLR-3 line connector. Each beltpack combines high headroom, low-noise audio and shaped frequency contour (the “Clear-Com Sound”) to deliver clear audio. The RS-701 features LEDs on the top of the beltpack for visual indication of incoming and outgoing call signaling. A mic preamp enables intelligible voice communication for every volume level. Recessed rotary volume control, Talk and Call keys guard against accidental activation. The RS-701 has a low operating current to allow for more beltpacks in a daisy-chain.

The RS-701 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

• Single-channel analog beltpack
• Visual LED indication on top of keypad: Power (green), Call Signal (amber), and Talk Latch (green)
• Tactile buttons for Call and Talk
• Recessed rotary control for Volume with end stops for 270° rotation range
• Concealed, programmable DIP Switches for Latch Talk, Talk with Call, LEDs Off, Mic Gain, Mic Type and HP Level Off
• Fully compatible with current and previous models of Clear-Com analog partyline systems
• Low operating current for more beltpack daisy-chaining
• Rugged and strong construction
• “Clear-Com Sound” for intelligible audio

Microphone Pre-Amplifier

• Mic to Line (without limiter acting)
• Frequency Response: 280 – 15kHz ± 3dB
• Microphone output to line – Audio Level (-50dBm Electret input): -9dBm
• Microphone output to line – Distortion: <0.1%
• Microphone output to line – Signal to Noise: >65dB

Headphone Pre-Amplifier

• Frequency Response – Line to Headphone: 150 – 20kHz ± 3dB
• Headphone input from line – Audio Level (-9dBm Electret input): 3.5dBm
• Headphone input from line – Distortion: <0.5%
• Headphone input from line – Signal to Noise: >50dB
• Earphone to Mic – Crosstalk: >80dB
• Sidetone – Adjustment Range (-80db mic input): >45dB

Keypad Indicators

• Power: Green LED
• Talk: Green LED
• Call: Orange LED

Connectors

• Intercom Line: (2) 3-pin XLR–M–F
• Pin 1: Common
• Pin 2: PL Power (+28V DC)
• Pin 3: Line (Audio)

Headset: 4-pin XLR–M

• Pin 1: Mic - (Mic Common)
• Pin 2: Mic +
• Pin 3: Spkr-
• Pin 4: Spkr+ (and 0.5*VCC DC, supply between Pin 4 and Pin 1)

Power

• Input Voltage Range: 12-30V DC
• Input Current (Idle): <=12mA
• Input Current (Max): <=28mA

Dimensions

• 3.4 x 4.5 x 1.7in (HxWxD)
• Weight: 10.5oz (0.30kg)