Overview

DBX 1215, Dual Channel 15-Band Equalizer
The 1215 provides standard features like dual channels, 15 2/3 octave bands, ISO frequency centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other thoughtful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.
Features
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
Specifications / Documents
- Input Connectors: 1/4" TRs, female XLR (pin 2 hot), and barrier terminal strip
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: Balanced 40 kΩ, unbalanced 20 kΩ
- Max Input: > +21 dBu balanced or unbalanced
- CMRR: >40 dB, typically > 55 dB at 1 kHz
- Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
- Output Type: Impedance-balanced/unbalanced, RF filtered
- Output Impedance: Balanced 200 Ω, unbalanced 100 Ω
- Max Output: > +21 dBu balanced/unbalanced into 2 kΩ or greater; > +18 dBm balanced/unbalanced (into 600Ω)
- Bandwidth: 20 Hz to 20 kHz, +0.5/-1 dB
- Frequency Response: < 10 Hz to > 50 kHz, +0.5/-3 dB; ±15 dB range; ±6 dB range
- Dynamic Range: 109 dB; 115 dB
- Signal-to-Noise Ratio: 90 dB, 97 dB
- THD+Noise: < 0.005%
- Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
- Bypass Switch: Bypasses the graphic equalizer section in the signal path
- Low Cut Switch: (recessed) Activates the 40 Hz 18 dB/oct. Bessel high-pass filter
- Range Switch: (recessed) Selects either ±6 dB or ±15 dB slider boost/cut range
- I/O Meter: 4-LED bar graph at -10, 0, +10, and +18 dBu
- Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz; 230 VAC 50/60 Hz
- Power Consumption: 24 W
- Power Connector: IEC receptacle
- Dimensions (H x W x D): 3.5" x 19" x 7.9"
- Weight: 8.5 lbs. (3.9 kg)
