Overview
ES-992U 2.3" Stand Alone Clock 12hr Display
The ES-996U is a Time Code display featuring 2.3" high red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5" H x 15" W x 3.5" D). The unit accepts, via the rear-mounted terminal block (BNC connector on rack-panel units), either ESE Time Code™ (TC76™, TC89™, or TC90™) or SMPTE/EBU Time Code (Time of Day only). RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-996U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day (if incoming time code contains Date information, such as ESE TC90, date-encoded SMPTE/EBU or ASCII formats "1" or "A"). If the Time Zone option is ordered, a rear-accessible DIP switch is installed for this function. If receiving ESE Time Code™ from a timer, the unit will display Minutes, Seconds and Tenths of Seconds (if the timer has the Tenths option).
| C | Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week). |
| Clear | Clear Anodized Front Panel |
| D | Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available. Available only if option 'P' is specified; or if Wall is specified on the ES-391A or ES-590A. |
| ESE | ESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves. |
| J | 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard. |
| P | 19" Front Panel (Rack Mount), this unit will be 2RU. |
| R | Remote Input: Rear-mounted connector for Remote Control. Available only if option 'P' is specified; or, if Wall is specified on the ES-391A or ES-590A. |
| S | Parallel BCD Slave: Parallel BCD Slave for use with old style BCD Outputs. |
| UL | "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply. |
| W | 3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied. |
