ESE ES-110 GPS Based Frequency Generator

ESE ES-110 GPS Based Frequency Generator

Write a Review
SKU:
ESE-ES110
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

The ES-110 generates a stable source of 10 MHz and 1 PPS using GPS (Global Positioning System) satellites as a reference. The unit provides 10 MHz in both Sine Wave and Square Wave (5 volt logic) form. The 1 PPS output is a 50% duty, 5 volt logic signal, positive-edge coinciding with the UTC seconds change. If frequency distribution is needed, we offer the ES-210, a Quad 1x6 1/5/10 MHz Distribution Amplifier. The ES-210 provides four independent 1x6 Frequency DAs in a single rack-mount enclosure.

 

Features

  • Disciplined Temperature-Compensated Crystal Oscillator
  • GPS Timing Reference With 1 x 10-8 Accuracy
  • Two 10 MHz Outputs (1 Sine Wave & 1 Square Wave)
  • Phase Coherent 1 PPS Output
  • Indoor/Outdoor Antenna with 13' Cable
  • Ruggedized Desk-Top Enclosure

Options

Ant GPS Antenna: High Performance GPS Antenna for harsh RF Environments.
BBU Battery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
DC DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
J 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
P 19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
UL "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.