EV RE3-BPCL UHF Wireless System with Bodypack and CL3 Cardioid Lavalier Microphone

Write a Review
Ships from Manufacturer
Adding to cart… The item has been added


EV RE3-BPCL UHF Wireless System with Bodypack and CL3 Cardioid Lavalier Microphone

The Electro-Voice RE3-BPCL is a next-generation UHF Bodypack/Lavier wireless microphone set. This particular model comes with an RE-3BPT bodypack tranmitter and a CL3 general-purpose lavalier microphone and your choice from 3 bandwidths for the North American market, chosen to minimize the complexities of today's challenging RF environments.

5H : 560-596MHz
5L : 488-524MHz
6M : 653-663MHz

The RE-3BPT bodypack tranmitter has a Robust Metal Body, is small and lightweight. Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.

  • Rack mountable ½-rack-space diversity receiver with rack mounting hardware
  • Five bodypack transmitter sets with lavaliers, headworn and instrument cable options
  • Robust aluminum handheld and cast magnesium bodypack transmitter bodies
  • Easy-to-read LCD displays
  • Recharging contacts on handheld and bodypack transmitters (can also be used with third party regular/rechargeable batteries)
  • Battery charging station (optional accessory)
  • Extensive selection of optional system accessories available
  • Selectable high (50 mW) and low (10 mW) transmitter power (most bands)
  • Broad selection of transmitter microphone types maximize application diversity
  • Transmitters powered by common AA cells (battery level displayed on receiver) 
  • 36 MHz tuning bandwidths (most bands)
  • Up to 1440 selectable frequencies
  • Frequencies independently adjustable in 25 kHz steps
  • Eight groups of pre-coordinated frequencies with up to 22 coordinated channels per group
  • Simple multi-channel system setup



RE3-RX RE3 Diversity Receiver

  • Frequency oscillation mode: Phase-locked loop (PLL)
  • Carrier frequency range: 470 - 865 MHz
  • Frequency ranges: 5L: 36 MHz (488-524 MHz), 5H: 36 MHz (560-596 MHz), 6M: 10 MHz (653-663 MHz)
  • Sync frequency: Ultrasonic 40 kHz
  • Diversity: Antenna diversity
  • Bandwidth: 36MHz
  • Signal/Noise ratio: >100dB(A)
  • Total harmonic distortion:<0.6%@1kHz
  • Receiving sensitivity: -81dBm for -12dB SINAD
  • Antenna type: Detachable ½ wave with BNC connector
  • Antenna booster power: DC12 - 15V/100mA
  • Function display by: LCD
  • Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator
  • Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
  • Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock
    status, transmitter display (freq or Gp/Ch)
  • Audio frequency output level: Ref:±22.5kHz Dev@1kHz Tone ¼” (6.3mm) Phone Jack:-10dBV XLR Jack:-4dBV(Line)、-24dBV(MIC) 
  • Squelch and noise muting: Noise muting and tone code locking
  • Output Connections: 1 balanced XLRM jack, 1  unbalanced ¼” TS (6.3mm) jack
  • Power supply: DC12~15V/500mA
  • Dimensions: Width: 8.27 in. Height: (with feet attached) 1.85 in. Height: (without feet attached) 1.73 in. Depth: (including antenna jack) 6.89 in. Depth: (not including antenna jack) 6.1 in. 
  • Net weight: 2.71 lb (1.23 kg)

RE3-BPT Bodypack Transmitter

  • Frequency oscillation mode: Phase-locked loop (PLL)
  • Frequency ranges: 5L: 36 MHz (488-524 MHz), 5H: 36 MHz (560-596 MHz), 6M: 10 MHz (653-663 MHz)
  • Sync frequency: Ultrasonic
  • RF power output: Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW, 5H (560-596MHz): Low 10mW / High 50mW, 6M (653-663MHz): Low 10mW /High 20mW
  • Display by: LCD + LED
  • Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock.
  • RF stability: <±10kHz@Fc
  • Modulation frequency shift: Wideband FM ±48kHz deviation
  • Harmonic radiation: <-50dBc
  • Input jack: 4-pin mini jack
  • Battery: 2 x AA alkaline battery or NiMH rechargeable battery
  • Finish: Black polyurethane paint
  • Dimensions (without antenna): Height: 3.2 in. Width: 2.54 in. Depth: 0.98 in. 
  • Net weight: 6.14 oz. (0.174 kg)

RE3-ACC-CL3 Cardioid lavalier mic with TA4F

  • Element type: Self-biased condenser
  • Frequency response: 100 Hz - 15 kHz
  • Polar pattern: Cardioid
  • Sensitivity: open circuit voltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA)
  • Maximum SPL: 115 dB SPL
  • Impedance: 3700 ohms
  • Power requirements: 3-9 VDC
  • Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
  • Electrical contact pinouts: Pin #1 - Ground, shield Pin #2 - Audio, Pin #3 - Bias voltage, Pin #4 - N/C
  • Dimensions (cable length) : 56.3"
  • Dimensions (head length) : 1.04"
  • Dimensions (head diameter) : 0.4"
  • Net weight: 0.758 oz
  • Microphone connector: 4-pin mini plug
  • Head finish: Non-reflecting black
  • Material: Die cast aluminum, steel wire cloth grille, black flexible PVC cable