Overview
M-Audio BX5-D3, 5" Powered Studio Reference Monitor (single)
The BX5 D3 was meticulously engineered to provide accurate sound reproduction. A high-current, high-headroom Class A/B amplifier drives a 5" military-grade Kevlar woofer and 1" silk dome tweeter. The speaker features a bi-amplified design, so it exhibits a sound that's both powerful and precise. A rear-mounted port was built to a specific length and diameter to produce deep, defined bass. A custom waveguide eliminates unwanted high-frequency scatter, ensuring that the BX5 D3's imaging is spot on. And don't worry about positioning — a front-panel LED shines brightly when the BX5 D3 is at the ideal monitor angle.
- Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
- 5” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
- 1” natural silk dome tweeter delivers superb transient details
- New computer-optimized tweeter waveguide for precise imaging
- Acoustic Space Control to fine-tune low-end response to your room
- Optimized rear port for extended low-frequency response
- XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
- Volume control enables you to dial in the perfect monitor playback level
- Ultra-wide range 52-35kHz frequency response covers full musical spectrum
- Front panel LED shines brightly when speaker is positioned at ideal monitor angle
Specifications
TYPE | 2-way near-field studio reference monitors |
LOW FREQ. DRIVER | 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded |
HIGH FREQ. DRIVER | 1 inch (25mm) magnetically shielded natural silk dome |
FREQUENCY RESPONSE | 52 Hz – 35 kHz |
CROSSOVER FREQUENCY | 2.5kHz |
LOW FREQ. AMPLIFIER POWER | 60W |
HIGH FREQ. AMPLIFIER POWER | 40W |
MAXIMUM PEAK SPL | 110 dB SPL - Full Bandwidth Pink Noise Measured |
INPUT SENSITIVITY | -10dBU |
INPUT CONNECTORS | 1x XLR balanced input connector 1x TRS balanced/unbalanced input connector |
INPUT IMPEDANCE | 10kΩ balanced, 20kΩ unbalanced |
POLARITY | Positive signal at + input produce outward LF cone displacement |
PROTECTION | RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter, external mains fuse |
POWER | Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60 Hz Consumption: 100W |
FUSE | 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V |
CABINET | Vinyl-laminated high-acoustic-efficiency MDF |
DIMENSIONS(WIDTH X DEPTH X HEIGHT) | 6.9” x 7.8” x 10” / 176 x 197 x 254 mm |
WEIGHT | 12.3 lbs, 5.6kg |