Nicom TSL910-LCD 10 Watt Composite Aural STL Transmitter

$2,690.00
Write a Review
SKU:
NIC-TSL910BLCD
Availability:
Ships from Manufacturer
Adding to cart… The item has been added

Overview

Nicom TSL910-LCD Composite Aural STL Transmitter

• Zero to 10
• Externally programmable in 25 Khz steps
• 3 SCA inputs
• RF monitoring BNC in the transmitter's front panel
• IF monitoring in the receiver's front panel
• All functions via LCD password protected
• Meets or exceeds all FCC and CCIR requirements

Specifications

  • Frequency Ranges: 940 to 960 MHz – 200 to 240 MHz – 300 to 330 MHz or custom frequencies available
  • Frequency stability : better than 5 ppm, 0 to 50 C (32 to 122 F)
  • Emission Class: F3E
  • Output Impedance & Connector: Type N” 50 Ohms
  • Harmonic Frequencies Level (ref. to carrier): < -65 dB
  • Spurious Frequencies Level (ref. to carrier): < -80 dB
  • Input Impedance: 600 ohms or greater
  • Input Level: -6 dBm to +10 dBm nominal for ± 75 Khz deviation adj.
  • Mono Input ( with pre-emphasis) XLR Connector: pre-emphasis 50/75ms selectable bandwidth 30Hz – 15 KHz
  • attenuation at 19 KHz 40 dB or greater
  • deviation from pre-emphasis curve ± 0.4 dB
  • Multiplex Input : BNC Connector Adj. from –3 dB to + 10 dB
  • Asyncronous AN S/N Ratio : 70 dB below ref.carrier with
  • 100% AM Modulation, 75 usec. De-emphasis
  • Syncronous AM S/N Ratio: 65 dB below ref. Carrier with
  • 100% AM modulation (FM modulation ± 75 Khz)
  • Distortion (THD): : 75kHz < 0.04% dev
  • S/N Ratio (ref. to 50 kHz / 1000 Hz):
  • Mono > 70 dB : Stereo > 65 dB
  • SCA inputs, BNC Connectors: 3 inputs(1.5 V p-p)
  • Power Supply operating voltage : 100 –240 V direct input power consumption 50 / 70 VA battery powered (optional) 24 Vdc, 3A
  • Operating Conditions cooling 12Vdc fan
    operating temperature 0° to +50°C (32° to +122°F) relative humidity 95% max.
  • Dimensions: weight 10 Lbs / 4.5 kg
  • width 19” / 483mm
  • height 1.74” / 44mm
  • depth 18” / 457mm