RDL RU-SC2 RS-232/RS-422 Serial Converter Full-Duplex

MSRP: $293.69
$0.00
(You save $293.69 )
Write a Review
SKU:
RDL-RUSC2
Availability:
Normally Ships From Manufacturer
Adding to cart… The item has been added

Overview

The RU-SC2 is the ideal choice in installations when two RS-232 devices requiring full-duplex communication are to be connected at a long distance. Connection to the RS-232 device is made on the front panel. The RS-422 input and output connections and power connections are made on the rear panel through full-size, clearly identified, barrier block terminals. Two RU-SC2s may be connected (using the RS-422 connections) at each end of 2-pair of long, balanced, twisted-pair line to permit feeding data between two RS-232 ports, thereby permitting serial communications over much greater distances than with conventional serial cables.

Features:

  • Conversion RS-232 ⇔ RS-422
  • Serial Data Over Long Lines
  • Rack-Mountable Convenience

Specifications

 
Input/Output:
1 each RS-232 (front panel-DB9 female) and RS-422 (rear-panel barrier block)
 
Baud Rate:
Determined by RS-232 device, up to 115.2 kbps
 
Indicators:
2 LED indicators (Transmit and receive)
 
Ambient Operating Environment:
0° C to 55° C
 
Power Requirement:
GROUND-REFERENCED, 24 Vdc @ 125 mA
 
Package Type:
Cardboard Box
 
Package Dimensions:
4.375 x 7 x 2.25 in.
 
Shipping Weight:
0.795 lbs.
 

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.