RDL ST-DA3 1x3 Line Level Distribution Amplifier

MSRP: $268.52
$201.39
(You save $67.13 )
Write a Review
SKU:
RDL-STDA3
Availability:
Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Distribution Amplifier

Overview

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the unsurpassed pure clarity, low-distortion and low-noise for which RDL products are known.

The ST-DA3 features RDL's SupplyFlex power input configuration. The module will operate directly from floating 24 Vdc or bipolar dc power. If a jumper is connected between the PWR minus terminal and any module ground, the module power becomes ground-referenced.

Features:

  • Audio Distribution with up to 3 Outputs
  • Balanced or Unbalanced Input and Outputs
  • Bridge an Audio Line for Local Distribution
  • Distribution with Impedance Conversion
  • Distribution with Gain or Loss
  • Inputs and Outputs RF-Protected
  • 1x3 Mono or Use Two Units for Stereo
  • RDL® SupplyFlex™ Power Input Configuration

 

Specifications

Input:
 
20 kΩ balanced or unbalanced

Input Signal:
 
-15 dBV to +21 dBu (for +4 dBu output)

Maximum Input Level:
 
+24 dBu

Outputs (3):
 
150 Ω balanced or 75 Ω unbalanced


Output Signal:
 
 

Balanced:
 
+4 dBu nominal balanced;

Unbalanced:
 
6 dB below balanced line level

Maximum Output Level:
 
+25 dBu

Frequency Response:
 
10 Hz to 100 kHz (± 0.05 dB)

THD+N:
 
< 0.002% (unity gain)

IMD:
 
< 0.003% (unity gain)

Noise below +4 dBu:
 
< -98 dB (unity gain)

Headroom:
 
> 20 dB (above +4 dBu)

Gain:
 
Unity ± 17 dB (adjustable)

CMRR:
 
> 60 dB (50 Hz to 120 Hz)

Power Requirement:
 
GROUND-REFERENCED or FLOATING, 24 Vdc @ 70 mA

Package Type:
 
Cardboard Box

Package Dimensions:
 
2 x 2 x 4 in.

Shipping Weight:
 
0.2 lbs.

WEEE weight:
 
0.145 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.