Overview
Studio Technologies Model 5205 Mic/Line to Dante Interface
The Model 5205 Mic/Line to Dante Interface is a general-purpose audio device that supports applications utilizing the Dante® audio-over-Ethernet media networking technology. Two analog microphone or line-level audio signals can be connected to the Model 5205. They are amplified as required and then converted to digital audio channels on an associated Dante connection. With the inherent interoperability of Dante, the Model 5205 can be used with other Studio Technologies Dante-enabled products or a multitude of devices from many other manufacturers.
Features
- Dante audio-over-Ethernet technology
- Two analog mic/line inputs to Dante digital audio outputs
- Selectable preamplifier gain and P48 phantom power
- Audio channel level metering
- Excellent audio quality
- AES67 and Dante Domain Manager support
- Power-over-Ethernet (PoE) powered
- Standard connectors; compact, lightweight design
- Configured using STcontroller application
Specifications / Documents
Network Audio Technology:
- Type: Dante audio-over-Ethernet
- AES67-2018 Support: yes, selectable on/off
- Dante Domain Manager (DDM) Support: yes
- Bit Depth: 24
- Sample Rates: 44.1, 48, 88.2, and 96 kHz
- Number of Dante Transmitter (Output) Channels: 2
- Dante Audio Flows: 2 transmitter
- Analog to Digital Equivalence: a +4 dBu input with 0 dB gain selected results in a Dante digital output level of –20 dBFS
Network Interface:
- Type: twisted-pair Ethernet with Power-over-Ethernet (PoE)
- Data Rate: 100 Mb/s (10 Mb/s Ethernet not supported)
Power:
- Power-over-Ethernet (PoE) per IEEE 802.3af class 2 (low power, ≤6.49 watts)
General Audio Parameters:
- Frequency Response (48 kHz Sample Rate): +0.0/–0.5 dB, 20 Hz to 22 kHz
- Frequency Response (96 kHz Sample Rate): +0.0/–0.5 dB, 20 Hz to 40 kHz
- Distortion (THD+N): 0.001% (–100 dB) at –1 dBFS, 40 dB gain, 22 kHz bandwidth
- Dynamic Range: >114 dB, 0 dB gain, A-weighted
- EIN: –123 dBu, 22 kHz bandwidth, 60 dB gain, 150 ohm source resistance
- IMD (SMPTE): <0.002%, 60 Hz/7 kHz, 4:1, –20 dBFS
Mic/Line Inputs: 2
- Type: electronically balanced
- Input Impedance: 3.7 k ohms
- CMRR: >75 dB, 20 Hz to 22 kHz, 40 dB gain
- Preamplifier Gain, Nominal: 0 (line), 20, 30, 40, 50, and 60 dB
- Preamplifier Gain, Actual: 0 (line), 19, 31, 40, 49, and 61 dB
- Compatibility: dynamic, ribbon, or phantom-powered mics
- Phantom Power: P48 per IEC 61938 standard, +45 volts DC nominal, on/off selectable
Meters: 2
- Function: displays level of Dante transmitter (output) signals
- Type: 8-segment LED, modified VU ballistics
Connectors:
- Mic/Line Inputs: 3-pin female XLR
- Ethernet: Neutrik etherCON RJ45
- USB: type A receptacle
Dimensions (Overall):
- 4.2 inches wide (10.7 cm)
- 1.7 inches high (4.3 cm)
- 5.1 inches deep (13.0 cm)
- Weight: 0.8 pounds (0.35 kg)
