Overview
Trip-Lite SMART3000RMXL2U SmartPro 120V 3kVA 2.88kW Line-Interactive Sine Wave UPS, 2U, Extended Run, Network Card Options, LCD, USB, DB9
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional Network Management Card option. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
- 3kVA / 3000VA / 2880W line interactive 2U rack/tower UPS, Sine Wave
- Extended runtime options up to 2880W, 0.96 Power Factor, 4 post mounting kit
- USB, RS232, EPO and slot for network management card options
- 120V NEMA L5-30P input, 8 NEMA 5-15/20R & 1 L5-30R outlets
- To use the Auto Probe feature, this product requires a WEBCARDLX network interface (sold separately) running LX firmware update 15.5.2 or later
Specifications
INPUT
Rated input current (Maximum Load) |
24A |
Nominal Input Voltage(s) Supported |
120V AC |
UPS Input Connection Type |
L5-30P |
UPS Input Cord Length (ft.) |
10 |
Recommended Electrical Service |
30A 120V |
Input Phase |
Single-Phase |
OUTPUT
Output Volt Amp Capacity (VA) |
3000 |
Output Capacity (kVA) |
3.00 |
Output Watt Capacity (Watts) |
2880 |
Output kW Capacity (kW) |
2.88 |
Power Factor |
.96 |
Nominal Voltage Details |
120v nominal output in battery mode |
Frequency Compatibility |
60 Hz |
Output Voltage Regulation (Line Mode) |
+6%, -14% |
Output Voltage Regulation (Battery Mode) |
+/-5% |
Load Management Receptacles |
Two switchable single outlet 5-15/20R load banks |
Output Circuit Breakers |
Two 20A output breakers protect 4 5-15/20R outlets each |
Output AC Waveform (AC Mode) |
Pure Sine wave |
Output AC Waveform (Battery Mode) |
Pure Sine wave |
Nominal Output Voltage(s) Supported |
110V; 115V; 120V |
Output Receptacles |
(8) 5-15/20R; (1) L5-30R |
Individually Controllable Load Banks |
Yes |
BATTERY
Battery Type |
Valve Regulated Lead Acid (VRLA) |
Full Load Runtime (min.) |
3 min. (2880w) |
Half Load Runtime (min.) |
10 min. (1440w) |
Expandable Battery Runtime |
Extended runtime supported via optional external battery packs |
Expandable Runtime |
Yes |
External Battery Pack Compatibility |
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible); BP48V27-2US (multi-pack compatible) |
DC System Voltage (VDC) |
48 |
Battery Recharge Rate (Included Batteries) |
Less than 5 hours from 10 to 90% (typical, full load discharge) |
Battery Access |
Front panel battery access door |
Internal UPS Replacement Battery Cartridge |
RBC58-2U |
Battery Replacement Description |
Hot-swappable, replaceable batteries |
VOLTAGE REGULATION
Voltage Regulation Description |
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145 |
Overvoltage Correction |
Input voltages between 127 and 145 are reduced by 12% |
Undervoltage Correction |
Input voltages between 108 and 96 are boosted by 12% |
Severe Undervoltage Correction |
Input voltages between 83 and 95 are boosted by 24% |
USER INTERFACE, ALERTS & CONTROLS
Front Panel LCD Display |
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) |
Switches |
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions |
Alarm Cancel Operation |
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available |
Audible Alarm |
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions |
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating |
570 |
EMI / RFI AC Noise Suppression |
Yes |
AC Suppression Response Time |
Instantaneous |
2-year warranty, 3 year with registration