Altec AIR P1500W Series Dehydrators

$7,141.00 - $9,272.00
Write a Review
SKU:
PUR-P1500W SERIES
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

Altec AIR P1500W Series Dehydrators are designed to intake wet ambient air and remove the moisture for delivery to applications requiring a constant, ondemand source of dry, pressurized air. This process is fully automatic and will remain consistent with minimal required periodic maintenance. These dryers are designed specifically for indoor use. The P1500W Series Air Dryers employ a fully digital operating platform offering the most accurate readings of dryer variables, removable access panel allowing easier access for adjustment and maintenance, and ultra-quiet Compressor with an industry leading maintenance interval of 8,000 hours.

  • Remote Real-Time Data and Alarm Reset Capabilities
  • SNMP Communication Compatible
  • Digital Display of All Operating Parameters
  • 8,000 Hour Maintenance Interval
  • Compact and Lightweight
  • Versatile Installation
  • Ultra Quiet Compressor
General Specifications:
  P1500W P1500WLP P1500WHP P1502W P1502WLP P1502WHP
Output Capacity Normal: 1,200 SCFD (34 SCMD) Continuous
Maximum: 1,500 SCFD (42.5 SCMD) Emergency
**FLOW Measurement will display **** for Flows over 1000 SCFD / 28.3 SCMD for HP Models
Power Requirements
(15 Amp Service Recommended)
110 - 125 VAC, 50/60 Hz 208 - 253 VAC, 50/60 Hz
Running Amps 7.0 Amps 3.5 Amps
Outlet Pressure Range 2 - 15 PSIG
(13.8 - 103.4 KPa)
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
2 - 60 PSIG
(13.8 - 414.0 KPa)
2 - 15 PSIG
(13.8 - 103.4 KPa)
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
2 - 60 PSIG
(13.8 - 414.0 KPa)
Outlet Air Relative Humidity Less than 2% RH
Compressor Type Two-Cylinder, 3/4 HP, Oil-less Type
Dehydrating Method Heatless Desiccant
Environment Operatating Temperature Range 40° - 85°F (5° - 30°C) Ambient
**Unit will go into SHUTDOWN Mode if Cabinet Temperature exceeds 120°F (49°C)
Noise Level 48 dBA at 10’ (3 m)
Alarms Standard Alarms - Complete readings of all critical measurement points, individual alarm indication display, including SNMP Communication
Outlet Connections 3/8” Press-to-Lock Tube Fitting
Dimensions 12” D x 17.25” W x 27” H (30.5 cm D x 43.8 cm W x 68.6 cm H)
Weight 80 lbs (36.3 kgs)