Overview
Altec AIR P4200 Series Dehydrators are designed to intake wet ambient air and remove the moisture for delivery to applications requiring a constant, ondemand source of dry, pressurized air. This process is fully automatic and will remain consistent with minimal required periodic maintenance. This dryer is designed specifically for indoor use. The P4200W Series Air Dryer employs a fully digital operating platform offering the most accurate readings of dryer variables, removable access panels allowing easier access for adjustment and maintenance, and ultra quiet compressors with an industry leading maintenance interval of 8,000 hours.
- Accurate Humidity Sensing within ±0.1% RH
- Digital Display of All Operating Parameters
- Remote Real-Time Data and Alarm Reset Capabilities
- SNMP Communication Compatible
- Remote Access via Web Browser Interface
- 8,000 Hour Maintenance Interval
- Quietest Dryer on the Market
| General Specifications: | ||||||
|---|---|---|---|---|---|---|
| P4200W | P4200WLP | P4202W | P4202WLP | |||
| Output Capacity | Normal: 2,600 SCFD (74 SCMD) Continuous Maximum: 4,200 SCFD (119 SCMD) Emergency |
|||||
| Power Requirements (15 Amp Service Recommended) |
110 - 125 VAC, 50/60 Hz | 220 - 230 VAC, 1-Phase, 50/60 Hz | ||||
| Running Amps | 8.6 Amps | 3.9 Amps | ||||
| Outlet Pressure Range | 5 - 20 PSIG (35 - 138 KPa) |
0.30 - 10 PSIG (2 - 69 KPa) |
5 - 20 PSIG (35 - 138 KPa) |
0.30 - 10 PSIG (2 - 69 KPa) |
||
| Outlet Air Relative Humidity | Less than 2% RH | |||||
| Compressor Type | Two-Cylinder, 3/4 HP, Oil-less Type | |||||
| Dehydrating Method | Heatless Desiccant | |||||
| Environment Operatating Temperature Range | 40° - 85°F (5° - 30°C) Ambient *Unit will go into SHUTDOWN Mode if Cabinet Temperature exceeds 120°F (49°C) |
|||||
| Noise Level | 63 dBA at 3’ (1 m) | |||||
| Heat Dissipation | 3,500 BTU/hr | 2,900 BTU/hr | ||||
| Alarms | Standard Alarms - Complete readings of all critical measurement points, individual alarm indication display, including SNMP Communication | |||||
| Outlet Connections | 1/2” NPT Female | |||||
| Dimensions | 21” D x 25.5” W x 49” H (53.3 cm D x 64.1 cm W x 124.5 cm H) | |||||
| Weight | 222 lbs (100 kgs) | |||||
