Altec AIR P550W Series Dehydrators

$5,783.00 - $6,800.00
Write a Review
SKU:
PUR-P550W SERIES
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

Altec AIR P550W Series Dehydrators are designed to intake wet ambient air and remove the moisture for delivery to applications requiring a constant, ondemand source of dry, pressurized air. This process is fully automatic and will remain consistent with minimal required periodic maintenance. These dryers are designed specifically for indoor use. The P550W Series Air Dryers employ a fully digital operating platform offering the most accurate readings of dryer variables, removable access panel allowing easier access for adjustment and maintenance, and ultra-quiet compressor with an industry leading maintenance interval of 8,000 hours. 

  • Remote Real-Time Data and Alarm Reset Capabilities
  • SNMP Communication Compatible
  • Digital Display of All Operating Parameters
  • 8,000 Hour Maintenance Interval
  • Compact and Lightweight
  • Versatile Installation
  • Ultra Quiet Compressor
General Specifications:
  P550W P550WLP P552W P552WLP
Output Capacity Normal: 350 SCFD (9.9 SCMD) Continuous
Maximum: 550 SCFD (15.6 SCMD) Emergency
Power Requirements
(15 Amp Service Recommended)
110 - 125 VAC, 50/60 Hz 208 - 253 VAC, 50/60 Hz
Running Amps 7.0 Amps 3.5 Amps
Outlet Pressure Range 2 - 15 PSIG
(13.8 - 103.4 KPa)
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
2 - 15 PSIG
(13.8 - 103.4 KPa)
0.30 - 7.50 PSIG
(2.07 - 51.71 KPa)
Outlet Air Relative Humidity Less than 2% RH
Compressor Type Two-Cylinder, 1/3 HP, Oil-less Type
Dehydrating Method Heatless Desiccant
Environment Operatating Temperature Range 40° - 85°F (5° - 30°C) Ambient
*Unit will go into SHUTDOWN Mode if Cabinet Temperature exceeds 120°F (49°C)
Noise Level 48 dBA at 10’ (3 m)
Alarms Standard Alarms - Complete readings of all critical measurement points, individual alarm indication display, including SNMP Communication
Outlet Connections 3/8” Press-to-Lock Tube Fitting
(4-Ports x 3/8” O.D. Tube Fittings on “H” Models)
Dimensions 12” D x 17.25” W x 27” H (30.5 cm D x 43.8 cm W x 68.6 cm H)
Weight 74 lbs (33.6 kgs)