Overview
BE3 Analog to SDI Converter with TBC and Frame Sync
- Use with Cameras, Satellite Receivers and VHS Decks
- Analog Input
- SD SDI Output
- TBC and Frame Sync
- 12 Bit
BrightEye 3 is an agile Time Base Corrector / Frame Synchronizer with composite, component and Y/C inputs and SD SDI video out. Input signals are digitized to 12 bits of resolution and time base corrected by a noise tolerant tracking circuit. An external reference input allows genlock to a timing reference such as color black.Input selection, gain control, and TBC enable is provided through the front panel interface. Video levels can be adjusted through BrightEye Mac or PC software.Input and Reference presence are indicated through front panel LEDs. BrightEye 3 is great for capturing consumer VCRs into non-linear editing systems.
Specifications:
- Analog Input
- Number One
- Type Beta/SMPTE, Y, Pr, Pb
- NTSC, PAL Composite
- NTSC, PAL S-Video
- Impedance 75 U
- Return Loss >40 dB
- Input DC +/-1 volt DC
- Input Hum <100 mV
Serial Digital Output - Number One
- Type 270 Mb/s SD Serial Digital
- (SMPTE 259M)
- Delay Adjustable from < 90 Sec to 1 frame
- Impedance 75 U
- Return Loss >15 dB
- Output DC None (AC coupled)
Analog to SDI Performance - Bit Resolution 12 bit input quantization
- 4 x oversampling
- Signal to Noise >62 dB, weighted
- Frequency Response
- Composite and Y ±0.1 dB, 0 to 5.5 MHz
- Pr, Pb ±0.1 dB, 0 to 2.75 MHz
- Delay Adjustable from < 90 Sec to 1 frame
Reference Input - Number One
- Type 1 V P-P Composite Video, PAL or NTSC
- Impedance 75 U
- Return Loss >40 dB
General Specifications - Size 5.63" W x 0.8" H x 5.98" D
- (143 mm x 21 mm x 152 mm)
- including connectors and flange
- Weight 14 oz
- Power 12 volts, 5 watts
- (100-230 VAC modular power supply)
- Temperature Range 0 to 40° C ambient (all specs met)
- Relative Humidity 0 to 95%, non-condensing
- Altitude 0 to 10,000 ft.
