RDL D-AVM4 Audio & Video Monitor Jack Panels on Decora Plate

MSRP: $72.19
$54.14
(You save $18.05 )
Write a Review
SKU:
RDL-DAVM4
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability
Type:
Wallplate / Table
Adding to cart… The item has been added

Overview

The D/S-AVM4 is the ideal choice in installations requiring a wall-mounted audio and video monitor input or output plate for computers, monitors and projectors. The panel is typically installed as an audio/video input plate, but may equally be used as an output jack panel.

The front panel features a pass-through video monitor connector. Video connections are made on the front and rear panel using a standard DB15 video connector.

The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for stereo consumer line level audio sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are fed to a rear-panel detachable terminal block. The audio signals are unbalanced and are intended for short wiring runs where balanced lines are not required.

Features:

  • Stereo Audio Inputs to Stereo Audio Output
  • Stereo Inputs on RCA Jacks and Stereo Mini-Jack
  • Unbalanced Output on Detachable Terminal Block
  • Video Monitor Pass-Through Panel Connector
  • Available in RDL White/Gray

 

Specifications

Audio input connectors (3):
 
RCA jacks with gold contacts (Left and Right), Mini-jack 3.5 mm (Stereo)

Video input connector:
 
Female DB15

Audio output connector:
 
Detachable terminal block (Left and Right unbalanced audio)

Video output connector:
 
Female DB15 (pass-through from front panel)

Dimensions:
 
Height: 4.13 in. 10.49 cm
Width: 1.3 in. 3.3 cm
Depth: 1.8 in. 4.57 cm

Mounting Box Minimum Depth:
 
0.15 in. (0.38 cm) plus the depth of the installer-provided video connector

Package Type:
 
Cardboard Box

Package Dimensions:
 
3.625 x 4.625 x 2.125 in.

Shipping Weight:
 
0.25 lbs.

WEEE weight:
 
0.105 lbs.

Tariff code:
 
8536.69.4030

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.