Datavideo ITC-100, Intercom Base Station & 4-User Headset/Beltpack Kit

Datavideo ITC-100, Intercom Base Station & 4-User Headset/Beltpack Kit

The ITC-100 is a 19” Rack Mount 8 Way Intercom / Talkback System. It incorporates tally indicators for each channel and individual channel call buttons as well as a call all channels button. It is designed for communication use in a live mixing environment and enables easy bi-directional communication between the director and other members of the crew.

Users are connected to the base station via belt packs and 20 meter audio cables (5 pin XLR connectors) that may be extended up to 300 meters.

• ITC-100 1U 19” Rackmountable Base Unit for Director
• Combined XLR and 1/4' (6.3 mm) microphone input
• Dynamic / Condenser microphone selection switch
• Jack Socket 1/4' (6.3mm) for Headphones without microphone
• Jack Socket 3.5mm for Headset with microphone
• Speaker with volume control knob
• Channel selection buttons 1 – 8 select to talk to Belt Pack / Crew member
• ALL channels selection button
• Base Unit MUTE button

Beltpack

• Call Button for sending paging signal to Base Unit
• Talk button press and hold down to communicate with Base Unit / Director
• Headset volume control knob
• Bi-Color Tally LED on Belt Pack unit
• TD-2/3 on camera Tally Indicator wired from Belt Pack

ITC-100 Base Unit

• POWER: 12V / 1A (8W)
• TALLY: 2 x 15 Pin D-Sub Sockets for Tally A and Tally B
• MIC / HEADSET: 3.5mm Stereo Jack Socket for combination Headphone / Microphone Headset Impedance 8~600 ohms 100mW(min)
• HEADPHONE: 1/4" Stereo Headphone Socket Headset Impedance 8~600 ohms 100mW(min)
• LIGHT SOCKET (12V DC): 3 pin XLR connector. Pin2: 12V, Pin3: GND. Light power consumption 12V/100mA(max).
• MICROPHONE: 3 PIN XLR Jack, Switchable Condenser / Dynamic Input Microphone Level -67dB
• FREQUENCY RESPONSE: 550-3.6KHz, < +/-3dB
• THD: < 3%
• S/N: > 50dB
• BUILT-IN SPEAKER: 70mm x 30mm 32 Ohm 3 Watts
• OPERATING RANGE: Up to 200m between Base Station and Slave
• DIMENSION: 1RU, 19". W: 440mm x D: 130mm x H: 40mm
• WEIGHT: 1.9Kg

ITC-100SL Belt Pack Unit

• INPUT: 5 Pin XLR Connector
• MIC / HEADSET SOCKET: 3.5mm Stereo Jack Socket for combination Headphone / Microphone Headset Impedance 8~600 ohms 100mW(min) Microphone Level -67dB Or 2.5mm Stereo Jack Socket, for Motorola Mobile Phone type headset / microphone
• TALLY OUT SOCKET: 3.5mm Jack Socket to connect to TD-2 or TD-3 Tally Indicator
• TALLY LED: Bi-Color LED RED indicates LIVE / GREEN Indicates CUED
• POWER LED: Illuminates to indicate that power is being received
• OPERATING RANGE: Up to 200m between Base Station and Slave
• DIMENSION: 114mm x 97mm x 35mm
• WEIGHT: 348g

In the Box

• 1 x ITC-100 Base Unit
• 4 x ITC-100SL Belt Pack
• 4 x ITC-100SL Carry Case
• 4 x Cable 5pin 20cm XLR to XLR
• 4 x 3.5mm Jack to 3.5mm Jack Cable
• 4 x Headset with microphone
• 4 x Tally LED Indicator
• 1 x XLR Gooseneck Microphone
• 1 x XLR Gooseneck Light
• 1 x 12V 1A Power Supply Unit