Andrew Commscope MT050C DryLine® Dehydrator, Low-pressure membrane, psig (2-6 adjustable)

MSRP: $4,830.00
Write a Review
SKU:
AND-MT050C
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

MT050C

DryLine® Dehydrator, Low-pressure membrane, 19 in rack mountable, Wall mountable, 3.0 psig (2-6 adjustable), with summary and discrete alarms, 115/230 Vac, 50/60 Hz

Product Classification
Brand DryLine®
Product Type Dehydrator

Alarm
Alarm Type Discrete | Summary
Excess-Run Alarm 10 minutes, factory set
High-Humidity Alarm 7.5% RH, factory set
Low-Pressure Alarm 68 mbar | 7 kPa | 1 psig
Power-Fail Alarm Loss of input power

Dimensions
Net Weight 20.0 kg | 44.1 lb
Product Depth 419.1 mm | 16.5 in
Product Height 172.7 mm | 6.8 in
Product Width 439.4 mm | 17.3 in
Gross Weight, Packed 23.0 kg | 50.7 lb
Product Depth, Packed 541.0 mm | 21.3 in
Product Height, Packed 312.4 mm | 12.3 in
Product Width, Packed 502.9 mm | 19.8 in
Electrical Specifications
Voltage 115/230 Vac ±10%, selectable
Alarm Contact Rating Form C dry contacts, 2 amps at 30 Vdc
Operating Temperature -10 °C to +50 °C (+14 °F to +122 °F)
Power Consumption, at runtime 220.0 W
Power Consumption, average 6.6 W
Power Consumption, maximum 220.0 W
Power Consumption, minimum 0.2 W
Power Cord Europe power cord with stripped leads | USA power cord
Power Frequency 60/50 Hz
Power Phase Single
Suggested Circuit Breaker Size 20 A
Circuit Breaker Requirement Electrical connections require separate circuits for dehydrator installation
General Specifications
Volume Capacity, minimum 0.0 L | 0.0 ft³
Volume Capacity, maximum 1699.0 L | 60.0 ft³
Brand DryLine®
Dehydrator Type Automatic Membrane
Dew Point Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
Flow Rate, nominal 3.40 SLPM | 0.12 SCFM
Includes 3/8 in polyethylene tubing | 90º elbow fitting | Instruction sheet | Male connector fitting | Needle valve | Power cord | PTFE tape
Mount Type Bench | Floor | Rack | Wall
Port Count 4
Port Type 3/8 in PE tube
Rack Type EIA 19 in | ETSI N3 (optional)
Rack Units 4
Regulated Output Pressure Type factory set
Regulated Output Pressure, maximum 42.0 kPa | 6.0 psi
Regulated Output Pressure, minimum 14.0 kPa | 2.0 psi
Voltage Type ac
Regulatory Compliance/Certifications
Agency Classification
RoHS 2011/65/EU Compliant
China RoHS SJ/T 11364-2006 Below Maximum Concentration Value (MCV)
ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system