RDL ST-LCR1 Momentary Logic Controlled Relay DPDT

MSRP: $145.30
$108.97
(You save $36.33 )
Write a Review
SKU:
RDL-STLCR1
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability

Overview

The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR1 provides momentary operation and is ideally suited where additional switching contacts are needed to be added to nearly any type of control signal.

Features:

  • Add Contacts to Any Control Signal
  • Activation from Logic Circuits
  • DPDT Switching Relay
  • Open-Collector Switching
  • Control from Switch, Button or Logic Circuits

Specifications

Control Inputs:
 
SLAVE terminal used as an input from remote push-button or switch turns on relay when that switch is on. Activation is by connecting this input to Ground. Input from other equipment's open-collector output turns relay on when open-collector is on.
Note: RDL switching STICK-ONs have open-collector outputs suitable for driving an ST-LCR1.
5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied.
24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied.

Control Output:
 
SLAVE terminal open-collector @ 25 mA suitable to drive indicators or slave LCRs

Switching Contacts:
 
Double-pole, double-throw

Maximum Switching Power:
 
60 W (220 Vdc, 125 Vac, 2 A)

Ambient Operating Environment:
 
-10° C to 55° C

Power Requirement:
 
GROUND-REFERENCED, 24 Vdc @ 50 mA *
* Assumes 20 mA max load at SLAVE output

Dimensions:
 
Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), D...

Package Type:
 
Cardboard Box

Package Dimensions:
 
2 x 2 x 4 in.

Shipping Weight:
 
0.185 lbs.

WEEE weight:
 
0.135 lbs.

Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.