RDL ST-VOX1 Voice Operated Relay DPDT

RDL ST-VOX1 Voice Operated Relay DPDT

MSRP: $197.22
$147.92
Write a Review
SKU:
RDL-STVOX1
Availability:
Normally Ships From Manufacturer, Contact us for Pricing and Availability

Overview

The ST-VOX1 is an Audio Controlled Relay in the STICK-ON® series. When used in intercom or talkback applications, the ST-VOX1 may be triggered directly from an unbalanced microphone. In many such installations the microphone or other audio source must be preamplified, making the ST-VOX1 an ideal mate to work with the STM-1 preamp. The unbalanced output from the STM-1 can be used to trigger the ST-VOX1, while the STM-1 balanced output is used for the audio feed.

Features:

  • Switching Controlled by Voice Signal
  • Switching from Mic or Line Level Signals
  • Precise Threshold Adjustment
  • DPDT Switching Contacts
  • Open-Collector SLAVE Output

Specifications

Mic Input:
 
5 kΩ unbalanced line
Line Input:
 
200 kΩ unbalanced
Control Outputs:
 
Open-Collector @ 25 mA, suitable to drive indicators or Slave LCR
Relay Contacts:
 
Double-pole-double-throw
Max. Switching Power:
 
60 W, (220 Vdc, 125 Vac, 2A)
Mic Input Sensitivity:
 
Adjustable -80 dBu to -50 dBu
Line Input Sensitivity:
 
Adjustable -45 dBu to -15 dBu
Indicators:
 
Audio threshold LED (for setting sensitivity)
Retrigger Delay:
 
50 ms
Release Delay Time Adjustment Range:
 
Relay Contacts: 70 to 260 ms
Slave open-collector output: 15 to 260 ms
Activation Response Time
 
Relay Contacts: 5 ms
Slave open-collector output: 3 ms
Ambient Operating Environment:
 
0° C to 55° C
Power Requirement:
 
GROUND-REFERENCED 24 Vdc @ 50 mA *
* Assumes 20 mA max load at SLAVE
output
Dimensions:
 
Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6cm), Depth 1.6 in. (3.9 cm)
Package Type:
 
Cardboard Box
Package Dimensions:
 
2 x 2 x 4 in.
Shipping Weight:
 
0.2 lbs.
WEEE weight:
 
0.15 lbs.
Tariff code:
 
8543.70.9960

 

RDL Three-Year Limited Warranty Installation of these products by the Purchaser shall constitute Purchaser’s acknowledgement and acceptance of the terms and conditions for sale and of this warranty, and shall constitute the Purchaser’s determination of the suitability of this product for the Purchaser’s intended application. Radio Design Labs, Inc., also referred to as RDL®, warrants to the Purchaser that products manufactured by RDL are free from defects in material and workmanship. This warranty applies to the period of three years from the date of shipment, except for component parts or products purchased from other sources and supplied by RDL. Such component parts or products bear only the warranty of the manufacturer thereof in effect at the time of shipment to the Purchaser. RDL will, without charge, and after written notice has been received and acknowledged by RDL, repair an RDL product if proved to be defective according to the usage of the trade, when such equipment is received by RDL at the location it designates with shipment costs prepaid by the Purchaser. RDL shall not be liable for any expense whether for repairs, replacements, material, service, or otherwise, incurred by the Purchaser or modifications made by the Purchaser to the product. No equipment shall be deemed defective if it shall fail to operate in a normal or proper manner due to exposure to excessive moisture in the atmosphere, excessive temperature extremes, improper environmental cleanliness, or any other environment not consistent with the principles of good engineering practice. In no event shall RDL have any liability for consequential damage or expense directly or indirectly arising from the use of the products, or any inability to use it either separately or in combination with other equipment or materials, or from any other cause, whether used in accordance with instructions or not. This warranty is void if equipment is altered in any way by other than RDL. RDL products are NOT intended for use in life support appliances, devices, or systems. Use of RDL products in such applications is done solely at the liability of the reseller/installer and/or end user. RDL reserves the right to change design parameters and specifications at any time without notice. The performance measurements reflect the products at the time of printing. This warranty is in lieu of all others, either expressed or implied. No representative is authorized to assume for RDL any other liability in connection with RDL products.