JK Audio Voice Path Telephone Handset Audio Tap

MSRP: $110.00
Write a Review
SKU:
JKA-VOICE
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability

Overview

Voice Path Telephone Handset Audio Tap

Voice Path continuously routes both sides of your conversation to the mic input of your PC (or Mac) sound card. Simply press in the gray button when you are ready to play audio recordings back into the phone line. With the button in, Voice Path will disconnect the microphone from your handset and send audio down the phone line and into your receiver. You will hear the transmit audio as well as the voice from the other end of the call.

Record and Play Audio Clips

Endless possibilities such as: News rooms, Weather and Traffic reports, Ad Creation and Proofing, Transcribing, Voice Mail Prompts, Production Room...Simply connect between the handset and base of your telephone. The attached cables connect directly to the in and out jacks of your sound card. Use your PC software to record, edit, and then play your conversation right back into the phone line.

Phone Compatibility

When sending audio into a telephone, Voice Path must emulate the microphone that is in the handset. A switch on the back of Voice Path allows you select between the three basic types of handset microphone: electret, dynamic, and carbon. Signal level to the PC sound card is also adjustable. Voice Path will not work with telephones that have a keypad in the handset.

Specifications

Input - Left Channel Only 1/8" (3.5mm) Mono
Impedance 10k ohms
Level 250 mV nominal
Output 1/8" (3.5mm) Mono
Impedance 2800 ohms
Level 100 mV max
Misc  
Handset Type Electret, Dynamic, Carbon
Handset and Telephone Connectors RJ22
Handset Cable 18" Flat Cable (Provided)
Size 3" x 1" x 2" (7.6 x 2.5 x 5.1 cm)
Weight 9 oz