Skip to main content

DBX 1231, Dual Channel 31-Band Equalizer

DBX

$655.00
Write a Review
SKU:
DBX-1231
Availability:
Ships from Manufacturer, Contact us for Pricing and Availability
Type:
Equalizer
Adding to cart… The item has been added

Overview

DBX 1231, Dual Channel 31-Band Equalizer

The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

Features

  • Switchable boost/cut ranges of ±6 or ±15 dB
  • Electronically balanced/unbalanced inputs
  • Servo balanced/unbalanced outputs
  • RF filtered inputs and outputs
  • XLR, Barrier Strip, and 1/4" TRS connectors
  • -12dB/+12dB input gain range
  • 18dB/octave 40Hz Bessel low-cut filter
  • Chassis/signal ground lift capability
  • Internal power supply transformer
  • Power-off hardwire relay bypass with 2-second power-up delay

Specifications / Documents

  • Input Connectors: 1/4" TRs, female XLR (pin 2 hot), and barrier terminal strip
    • Input Type: Electronically balanced/unbalanced, RF filtered
    • Input Impedance: Balanced 40 kΩ, unbalanced 20 kΩ
    • Max Input: > +21 dBu balanced or unbalanced
    • CMRR: >40 dB, typically > 55 dB at 1 kHz
  • Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
    • Output Type: Impedance-balanced/unbalanced, RF filtered
    • Output Impedance: Balanced 200 Ω, unbalanced 100 Ω
    • Max Output: > +21 dBu balanced/unbalanced into 2 kΩ or greater; > +18 dBm balanced/unbalanced (into 600Ω)
  • Bandwidth: 20 Hz to 20 kHz, +0.5/-1 dB
  • Frequency Response: < 10 Hz to > 50 kHz, +0.5/-3 dB; ±15 dB range; ±6 dB range
  • Dynamic Range: 109 dB; 115 dB
  • Signal-to-Noise Ratio: 90 dB, 97 dB
  • THD+Noise: < 0.005%
  • Interchannel Crosstalk: < -80 dB, 20 Hz to 20 kHz
  • Bypass Switch: Bypasses the graphic equalizer section in the signal path
  • Low Cut Switch: (recessed) Activates the 40 Hz 18 dB/oct. Bessel high-pass filter
  • Range Switch: (recessed) Selects either ±6 dB or ±15 dB slider boost/cut range
  • I/O Meter: 4-LED bar graph at -10, 0, +10, and +18 dBu
  • Operating Voltage: 100 VAC 50/60 Hz; 120 VAC 60 Hz; 230 VAC 50/60 Hz
  • Power Consumption: 24 W
  • Power Connector: IEC receptacle
  • Dimensions (H x W x D): 5.25" x 19" x 7.9"
  • Weight: 10.6 lbs.