Overview

DBX 131s, Single 31-Band Graphic Equalizer
When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.
The dbx 131s includes a single 31-band channel of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best.
Features
- Single 31-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12dB
- 12dB per octave, 3dB down @ 50Hz low-cut filter
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inputs and Outputs
- Frequency Response of <10Hz to >50kHz
- Dynamic range of greater than 108dB
Specifications / Documents
- Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: Balanced 40 kΩ, unbalanced 20 kΩ
- Max Input: > +21 dBu balanced or unbalanced
- CMRR: > 40 dB, typically > 5 5dB at 1 kHz
- Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
- Output Type: Impedance-balanced/unbalanced, RF filtered
- Output Impedance: Balanced 100 Ω, unbalanced 50 Ω
- Max Output: > +21 dBu balanced/unbalanced into 2 kΩ or greater; >+18 dBm balanced/unbalanced (into 600 Ω)
- Bandwidth: 20 Hz to 20 kHz, +0.5/-1dB
- Frequency Response: < 10 Hz to > 50 kHz, +0.5/-3 dB
- Dynamic Range: Typically > 112 dB
- Signal to Noise Ratio: Typically > 95 dB
- THD+Noise: < 0.003%
- Interchannel Crosstalk: < -90 dB, 20 Hz to 20 kHz
- Bypass Switch: Bypasses the graphic equalizer section in the signal path
- Low Cut Switch: Activates the 50 Hz 12 dB/oct. high-pass filter
- Range Switch: Selects either ±6 dB or ±12 dB slider boost/cut range
- Operating Voltage: 100-240VAC 50/60Hz
- Power Consumption: 15 W
- Power Connector: IEC receptacle
- Dimensions (H x W x D): 1.75" x 19" x 6" (4.4 x 48.26 x 15.24 cm)
- Unit Weight: 4.8 lbs (2.2 kg)
